Q-Logic FC HBA CLI manual These commands, To view the current boot device selection on all HBAs

5– Non-interactive Commands Command Summary

S

In these commands:

HBA Instance = HBA number (use -gcommand to find)

HBA WWPN = World wide port name of the HBA

Target WWNN = World wide node name of the target

Target WWPN = World wide port name of the target

Target ID = ID to which the target is bound

LUN ID = ID of the LUN

To view the current boot device selection on all HBAs:

#scli -e (view ?)

To view the current boot device selection for a specific HBA:

#scli -e (<HBA Instance> <HBA WWPN>) (view ?)

In Solaris SPARC, if the system is running with a csh or tsch shell, include double quotes around the question mark (?). For example:

#scli -e <HBA> "?"

In Windows and Linux, each HBA’s currently selected boot device is shown in the following format:

<HBA Number> <HBA WWPN> <Target WWNN> <Target WWPN> <LUN ID>

Solaris shows each HBA’s currently selected boot device in the following format:

<HBA Number> <HBA WWPN> <Target WWNN> <Target WWPN> <Target ID> <LUN ID>

If the system does not have an HBA with a boot device selected, the following message appears:

There is no boot device selected for any HBA in the system.

Following is an example of the Boot Device option when viewing the boot device for a single HBA. In this example, no boot device is configured (selectable boot is disabled; the boot port name is all zeroes).

-------------------------------------------------------------

HBA 1: QLA2340 WWPN xx-xx-xx-xx-xx-xx-xx-xxPort ID 00-00-00

-------------------------------------------------------------

Boot Device Settings:
--------------------------------------
Selectable Boot: Disabled
--------------------------------------
(Primary) Boot Port Name	LUN	------
00------------------------00-00-00-00-00-00-00	-----------------------
	00-00-00-00-00-00-00-00	0
Press <Enter> to continue:

5-10 SN0054614-00 F