Q-Logic FC HBA CLI manual To bind a selected target to a specific HBA, type

A

5– Non-interactive Commands Command Summary

Yes	Disk xx-xx-xx-xx-xx-xx-xx-xx xx-xx-xx-xx-xx-xx-xx-xx 10-02-E4	1
Yes	Disk xx-xx-xx-xx-xx-xx-xx-xx xx-xx-xx-xx-xx-xx-xx-xx 10-02-E8	2
	Press <Enter> to continue:

To bind a selected target to a specific HBA, type:

#scli -p (<HBA Instance> <HBA WWPN>) (<Target WWNN> <Target WWPN> <Target Port ID> <Target ID>)

Where:

HBA Instance = HBA number (use -gcommand to find)

HBA WWNN = Word wide node name of the HBA

HBA WWPN = World wide port name of the HBA

Target WWNN = World wide node name of the target

Target WWPN = World wide port name of the target

Target Port ID = Port ID of the target

Target ID = ID to which the target is bound

To bind multiple targets with a single command, repeat the following group: <Target WWNN> <Target WWPN> <Target Port ID> <Target ID>

To bind all targets on a specific HBA or to bind all targets on all HBAs, type:

#scli -p (<HBA Instance> <HBA WWPN> all) bind all

Where:

HBA Instance = HBA number (use -gcommand to find)

HBA WWPN = World wide port name of the HBA

To unbind a specific target, type:

#scli -p (<HBA Instance> <HBA WWPN>) (remove <target WWNN> unbind <target WWNN>)

Where:

HBA Instance = HBA number (use -gcommand to find)

HBA WWPN = World wide port name of the HBA

Target WWNN = World wide node name of the target

To unbind all targets on a specific HBA port or on all HBA ports, type:

#scli -p (<HBA Instance> <HBA WWPN> all) (remove all unbind all)

SN0054614-00 F 5-35