Q-Logic FC HBA CLI manual Run Read/Write Buffer Test

A

4 – Interactive Commands Diagnostics Menu (Command Line Options -kl, -kr, and -dm)

v1.x.x Build x

Warning: The Diagnostic Loopback and Read/Write Buffer Tests require that the HBA has no outstanding input and output operations. Please make sure there is no active I/O before starting the test(s).

Do you want to proceed with the test(s)?

1:Yes

2:No

Note: 0 to return to Main Menu

Enter Selection: 1

-------------------------------------------------------------------

HBA 1: QEM2462 Port 1 WWPN xx-xx-xx-xx-xx-xx-xx-xxPort ID 02-0E-00

------------------

Test Configuration

------------------

Data Pattern		: Random
Data Size (Bytes)		: 512
Number of test(s)(1-65535)		: 500
Test Increment(1-65535)		: 1
On Error		: Ignore
Test Continuous		: OFF
--------------------------------------------------------------
Diagnostics - Loopback Test Result
----------------------------------
Note: Press <Enter> to stop the test any time
---------------------------------------------					FrameLength	Active
HBA	Test Data Pattern	Status	CRC	Disparity
---	-----------------------	------	----	---------	-----------	------
1	B4-31-0E-AA-AD-CF-D5-B0	Success	0	0	0	\

4.12.2.2

Run Read/Write Buffer Test

When you select Start Diagnostics Test for the read/write buffer test, the following is returned (example):

------------------------------------------------------------------------------

HBA Instance 4: QLE2562 Port 2 WWPN 21-01-00-1B-32-36-18-EE PortID 01-0F-00

------------------------------------------------------------------------------

------------------
Test Configuration
------------------	: Random
Data Pattern
Data Size (Bytes)	: 128
Number of test(s)(1-10000)	: 10000
Test Increment(1-10000)	: 1

SN0054614-00 F 4-71