Q-Logic FC HBA CLI manual Link Status, Command Line Option -ls

4 – Interactive Commands

Statistics Menu (Command Line Options -gs and -ls)

S

3.From the HBA Statistics Menu, type the number for the Show HBA Statistics option, and then press ENTER.

4.The Statistics Menu appears and prompts you to select an HBA port. Type the number for the port, and then press ENTER.

The HBA statistics for that port are shown. For example:

------------------------------------------------------------------------------

HBA Instance 0: 2200 Port 1 WWPN 21-00-00-E0-8B-03-55-7C PortID 00-00-EF

------------------------------------------------------------------------------

HBA	Port Statistics
-----------------------------------------
The	following keys are in use		during test:
	<R> <r>	- Reset All Counters
	<RETURN>	- Abort Test
-----------------------------------------				IOPS	BPS		Time
HBA	Port Errors	Device Errors	Reset I/O Count
---	-----------	-------------	----- ---------- ----- ---------- -----------
0	0	0	30568	0	0	0	09:43:43	AM

4.13.2

Link Status

(Command Line Option -ls)

13:Statistics 2: Link Status

The following sections describe how to view and change the HBA’s link status.

NOTE:

Under Solaris, link status is disabled if you are using drivers from the OS installation CDs (QLC driver).

From the Main Menu, select Statistics and then select Link Status. When you select the Link Status option, SANsurfer FC HBA CLI shows the following options:

„Configuration

„Show Link Status

4.13.2.1

Configuration

13: Statistics 2: Link Status 1: Configuration

When you select the Configuration option, the Link Status Settings Menu appears and allows you to view and configure the following:

„Current Settings

„Restore Default

4-80 SN0054614-00 F