Q-Logic FC HBA CLI manual Display Host Topology, Display Version, Virtual Port

5– Non-interactive Commands Command Summary

S

NOTES:

„The <0 ON> option flashes the LED until interrupted. The <1 PRESET> option flashes the LED 12 times.

„This feature is supported only on JBOD devices.

5.3.31

-tp

(Display Host Topology)

Use the -tpoption to show the topology configuration of the host:

#scli -tp topology

Under Linux, this feature is disabled if you are using the ioctl or sysfs (inbox) driver.

Section 5.2.3 covers this command.

5.3.32

-v

(Display Version)

NOTE:

This option is valid only in non-interactive mode.

To show the version number of the SANsurfer FC HBA CLI tool, type:

#scli -v

The system shows the following information:

SANsurfer FC HBA CLI v1.x.x Build x

Copyright 2003-2007 QLogic Corp. All rights reserved.

Command Line QLogic FC Host Bus Adapters. Build Type: Release

Build Date: xx/xx/xxxx xx:xx:xx AM

5.3.33

-vp

(Virtual Port)

To list all virtual ports on a physical HBA port, type:

# scli -vp (<HBA Instance> : <HBA WWPN>) list all

5-40 SN0054614-00 F