Q-Logic FC HBA CLI manual Display Target Information, Target Beacon On/Off

A

5– Non-interactive Commands Command Summary

5.3.29

-t

(Display Target Information)

To show the target information for all HBAs in the system, type:

#scli -t [ <all> ]

To show the target information for a specific HBA, type:

#scli -t (<HBA Instance> <HBA WWPN>)

To show specific target information for a specific target on an HBA, type:

#scli -t (<HBA Instance> <HBA WWPN>) (<Target WWPN> <Target Port ID>)

Where:

HBA Instance = HBA number (use -g command to find)

HBA WWPN = World wide port name of the HBA

Target WWPN = World wide port name of the target

Target Port ID = Port ID of the target

To show the target information on all HBAs, type:

-t [<all>]

To show the target information on a specific HBA, type:

-t (<HBA Instance> <HBA WWPN>)

To show the target information for a specific target on a specific HBA, type:

-t (<HBA Instance> <HBA WWPN>) (<Target WWPN> <Target Port ID>)

iiDMA (Intelligent Interleave Factor) settings include:

„—targets –tapplies to all targets.

„<speed> indicates the supported intelligent interleave factor: 1, 2, 4, or 8 Gbps.

5.3.30

-tb

(Target Beacon On/Off)

To start or stop flashing a target’s LED, type:

#scli -tb (<HBA Instance> <HBA WWPN>) (<Target WWPN>) (<0 ON> <1 PRESET>)

SN0054614-00 F 5-39