Q-Logic FC HBA CLI manual Driver Settings, Parameter Name Alias Value Description Param name

A

4 – Interactive Commands Driver Settings Menu (Command Line Option -fg)

NOTE:

Options on the Driver Settings menu differ according to the driver type: failover, non-failover, Windows, Solaris, or Macintosh:

„Present persistently bound target(s) plus any new target(s) with driver default (option available for all drivers)

„Present persistently bound target(s) Only (option available for all drivers)

„Present targets with driver default (option available for failover driver only)

„Bind by World Wide Port Name (option available for all drivers except Macintosh driver)

„Bind by Port ID (option available for all drivers except Macintosh driver)

„Commit Changes

The current settings for the Present persistently bound target(s)... and Bind by... are indicated by the word Current in parentheses after the selection. To change these settings, select the menu number corresponding to the other option.

NOTE:

If you select a QLA22xx HBA, all QLA22xx HBAs on the host will use the same settings. If you select a 23xx HBA, all 2G/4G HBAs on the host will also use the same settings.

To save your changes, select Commit Changes.

Table 4-4shows the driver settings.

Table 4-4. Driver Settings

Parameter Name	Alias	Value	Description
<param name>	<param alias>	<param value>
PersistentOnly	PO	0,1	Present persistently bound
			target(s) only.
Persistent-	PN	0,1	Present persistently bound
PlusNew			target(s) plus any new tar-
			get(s) with driver default.
NewOnlya	NO	0, 1	Present targets with driver
			default.
BindWWPN	BW	0,1	Bind devices by WWPNs.

SN0054614-00 F 4-55