WebView Switches

Management Settings

From the Management Settings screen, you can set Serial Port Session Configuration, Telnet Session Configuration, or Secure Telnet (SSH) Configuration.

Serial Port Configuration

On the Serial Port Configuration screen, the Switch’s baud rate is displayed.

Select Edit and press the Enter key to make changes. Toggle to the desired speed and when your changes are complete, press the Esc key to return to the Action menu. Select Save and press the Enter key to save your changes. To exit, select Quit and press the Enter key.

Telnet Configuration

On the Telnet Configuration screen, the time-out is displayed. The value is entered in seconds. If you do not want the Telnet session to timeout, you may enter a value of 0 sec.

Select Edit and press the Enter key to make changes. When your changes are complete, press the Esc key to return to the Action menu. Select Save and press the Enter key to save your changes. To exit, select Quit and press the Enter key.

Chapter 4: Using the Console Interface for Configuration

Figure 4-11: Management Settings Menu

Figure 4-12: Serial Port Configuration

Figure 4-13: Telnet Configuration

21

Configuring the Switch through the Console Interface

Page 32
Image 32
Linksys SRW208 manual Management Settings