Linksys SRW208 manual Rack-Mount Placement

WebView Switches

Rack-Mount Placement

To mount the Switch in any standard-sized, 19-inch wide, 1U high rack, follow these instructions:

1.Place the Switch on a hard flat surface with the front panel facing you.

2.Attach a rack–mount bracket to one side of the Switch with the supplied screws. Then attach the other bracket to the other side.

3.Make sure the brackets are properly attached to the Switch.

4.Use the appropriate screws (not included) to securely attach the brackets to your rack.

Proceed to the section, “Connecting the Switch.”

IMPORTANT: Make sure you use the screws supplied with the mounting brackets. Using the wrong screws could damage the Switch and would invalidate your warranty.

Figure 3-2: Attach the Brackets to the Switch

Figure 3-3: Mount the Switch in the Rack

Chapter 3: Connecting the Switch 13

Placement Options