Linksys SRW208 manual Security Settings

WebView Switches

Username & Password Settings

From this screen, you can administer the user names and passwords of those accessing the Switch.

Select Edit and press the Enter key to make changes. When your changes are complete, press the Esc key to return to the Action menu. Select Save and press the Enter key to save your changes. To exit, select Quit and press the Enter key.

NOTE: The Username & Password Settings screen can also be used to set passwords for other users.

Security Settings

The Security Settings screen enables you to configure security settings on the Switch, as well as generate and display the certificate.

SSL Certificate Generation

Use the Certificate Generation screen to specify a device-generated certificate.

The following fields are specified:

Public Key Length - Specifies the SSL RSA key length. (Range: 512 - 2048)

Organization Name - Specifies the organization name. (Range: 1 - 64)

Locality or City Name - Specifies the location or city name. (Range: 1 - 64)

State or Province Name - Specifies the state or province name. (Range: 1 - 64)

Country Name - Specifies the country name. (Range: 2 - 2)

Validity Term - Specifies number of days certification is valid. (Range: 30 - 3650)

Chapter 4: Using the Console Interface for Configuration

Figure 4-19: Username & Password Settings

Figure 4-20: Security Settings

Figure 4-21: SSL Certificate Generation

24

Configuring the Switch through the Console Interface