WebView Switches
QoS Tab - Basic Mode
The Basic Mode screen contains the following fields:
Trust Mode. Displays the trust mode. If a packet’s CoS tag and DSCP tag are mapped to different queues, the Trust Mode determines the queue to which the packet is assigned. Possible values are:
•CoS. Sets trust mode to CoS on the device. The CoS mapping determines the packet queue
•DSCP. Sets trust mode to DSCP on the device. The DSCP mapping determines the packet queue
QoS Tab - Advanced Mode
Advanced QoS mode provides rules for specifying flow classification and assigning rule actions that relate to bandwidth management. The rules are based on the Access Control Lists (see Access Control Tab).
MAC ACLs and IP ACLs can be grouped together in more complex structures, called policies. Policies can be applied to an interface. Policy ACLs are applied in the sequence they appear within the policy. Only a single policy can be attached to a port.
In advanced QoS mode, ACLs can be applied directly to an interface in the Security - ACL Binding. However, a policy and ACL cannot be simultaneously applied to an interface.
After assigning packets to a specific queue, services such as configuring output queues for the scheduling scheme, or configuring output shaping for burst size, CIR, or CBS per interface or per queue, can be applied.
Out of Profile DSCP Assignments. This button opens up the Out of Profile DSCP screen.
Out of Profile DSCP screen
DSCP In. Displays the DSCP In value.
DSCP Out. Displays the current DSCP out value. A new value can be selected from the
The Policy Settings button opens the Policy Name screen.
Policy Name screen
Policy Name. Defines a new Policy name.
Chapter 5: Using the
Figure
Figure
64
QoS Tab - Basic Mode
