Linksys SRW208 manual Before You Install the Switch, Placement Options, Desktop Placement

WebView Switches

Before You Install the Switch...

When you choose a location for the Switch, observe the following guidelines:

•Make sure that the Switch will be accessible and that the cables can be easily connected.

•Keep cabling away from sources of electrical noise, power lines, and fluorescent lighting fixtures.

•Position the Switch away from water and moisture sources.

•To ensure adequate air flow around the Switch, be sure to provide a minimum clearance of two inches (50 mm).

•Do not stack free-standing Switches more than four units high.

Placement Options

Before connecting cables to the Switch, first you will physically install the Switch. Either set the Switch on its four rubber feet for desktop placement or mount the Switch in a standard-sized, 19-inch wide, 1U high rack for rack- mount placement.

Desktop Placement

1.Attach the rubber feet to the recessed areas on the bottom of the Switch.

2.Place the Switch on a desktop near an AC power source.

3.Keep enough ventilation space for the Switch and check the environmental restrictions mentioned in the specifications.

4.Proceed to the section, “Connecting the Switch.”

Chapter 3: Connecting the Switch 12

Before You Install the Switch...