WebView Switches
Admin Tab - Factory Defaults
The Factory Reset screen allows network managers to reset the device to the factory defaults shipped with the switch. Restoring factory defaults results in erasing the configuration file.
Admin Tab - Server Logs
The Server Logs screen contains information for viewing and configuring the Remote Log Servers. New log servers can be defined, and the log severity sent to each server.
Server. Specifies the server to which logs can be sent.
UDP Port
Facility. Defines a
Description. Provides a
Minimum Severity. Indicates the minimum severity from which logs are sent to the server. For example, if Notice is selected, all logs from a Notice severity and higher are sent to the remote server.
The Add to List button adds the Server Log configuration to the Server Log Table at the bottom of the screen.
Chapter 5: Using the
Figure
Figure
91
Admin Tab - Factory Defaults
