Canon QY8-1360-000 manual Part 3 OPERATING INSTRUCTIONS, Part 4 TECHNICAL REFERENCE

Page
2 -11	2.2.2 Printing range
2 -12	2.3 Interface Specifications

Part 3: OPERATING INSTRUCTIONS

3 - 1		1. PRINTER SETUP
3 - 1		1.1	Unpacking
3 -	2	1.2	Installation Location
3 -	3	1.3	Installation
3 -	3		1.3.1 Connecting the interface cable
3 - 3			1.3.2 Connecting the power supply
3 -	4		1.3.3 Installing the BJ cartridge
3 -	6		1.3.4 Replacing the ink tanks
3 -	7		1.3.5	Cartridge container [SB-60]
3 - 8		1.4	Turning Printer Power On and Off
3 - 8			1.4.1 Turning the power on
3 -	8		1.4.2 Turning the power off
3 - 9		1.5	Loading Printer Paper
3 -10		1.6	Names of Parts and Their Functions
3 -12		2. TRANSPORTING THE PRINTER
3 -12		2.1	Transporting the Printer
3 -13		2.2	Manual Capping
3 -14		3. PRINTER SERVICING FUNCTIONS
3 -14		3.1	Error Indications
3 -14			3.1.1	Operator call errors
3 -15			3.1.2	Service calls
3 -16		3.2	Warning Indications
3 -17		3.3	Function Settings
3 -17			3.3.1 Items set by control function
3 -18			3.3.2 Service mode of printer driver
3 -19		3.4	EEPROM
3 -19		3.5	Cleaning the BJ Cartridge
3 -20		3.6	Test Printout
3 -20		3.7	Pickup Roller Cleaning Function (HR-101)
3 -21		3.8	Service Mode
3 -22			3.8.1 Final factory test pattern
3 -22			3.8.2	Resetting EEPROM data
3 -23			3.8.3	Printing EEPROM data
3 -23			3.8.4	Setting destination country
3 -24			3.8.5	Other Function

Part 4: TECHNICAL REFERENCE

4 - 1		1. OVERVIEW
4 - 1		1.1	Printer Block Diagram
4 -	2	1.2	Initial Flowchart
4 - 3		1.3	Print Signal Sequence
4 -	4	1.4	BJ Cartridge Drive
4 -	4		1.4.1	Print drive control
4 - 5		1.5	Power-Off Sequence Flowchart
4 - 6		2. FIRMWARE
4 -	6	2.1	Interface
4 - 6			2.1.1	Compatible mode
4 - 7			2.1.2	Nibble mode
4 - 7			2.1.3	ECP mode

III