Part 3: Operating Instructions |
3.6 Test Printout
This printer has a
With the power off, press and hold the POWER button until the beeper has sounded twice. Release the POWER button to start the test print.
If you print the nozzle check pattern on plain paper, you will not be able to check the printing of the ink optimizer, which is
In this case, check the checker pattern at the top right of the nozzle check pattern for ink smears to see the general status of ink optimizer jetting.
If you need to check each nozzle for ink optimizer, print the nozzle check pattern on transparency material for bubble jet printers. Check the reflected light from the pattern to check the status of the nozzles. If it is difficult to see, coat the back surface with black ink, etc., or position the transparency on black paper. If you print a nozzle check pattern with the
Black Ink
+
Ink Optimizer
+
Color Ink
Black Ink
+
Ink Optimizer
+
Photo Ink
Black Head
Color Head
Photo Head
(Only When
is installed)
(Ink Optimizer Head)
Figure 3-20 Nozzle Check Pattern (Sample)
3.7 Pickup Roller Cleaning Function (HR-101)
Use this function to clean the pickup roller when using the pickup roller cleaning sheet supplied with the
1)Insert a sheet of cleaning sheet into the printer.
2)With the printer power ON, press the RESUME button until the beeper sounds four times.
3)The POWER indicator blinks. (Any paper in the printer is ejected.)
4)Paper loading and ejecting operations are performed.
5)On completion of roller cleaning, the beeper sounds and the POWER indicator lights continuously.