Part 3: Operating Instructions |
3.8.3 Printing EEPROM data
You can use the following
Printing EEPROM Data
1)Enter to a service mode. See "Part 3: 3.8 Service Mode" (page
2)Press the RESUME button four times. (The ERROR indicator turns off.)
3)Press the POWER button to print the EEPROM data on completion of the printer initialization sequence. All EEPROM data is printed in hexadecimal dump format.
Total Waste Ink Amount
Waste Ink Optimizer Amount |
| Page Count |
| Cleaning Operaion Count | |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Head Installation/Removal Count
Head Installation/Removal Count
Figure 3-22 EEPROM Data Print (Sample)
3.8.4 Setting destination country
This printer has functions designed for use domestic model BJ F800 and international model
Check that
If the printer has been set for the BJ F800 set, reselect the overseas function set as follows:
1)Enter to a service mode. See "Part 3: 3.8 Service Mode" (page
2)Press the RESUME button five times. (The ERROR indicator turns on.)
3)Press the POWER button to select the destination setting.
4)Press the POWER button. (If the printer has been set for BJ F800, the ERROR indicator turns off. If set for
5)Press the RESUME button once to change the destination setting and to turn the printer off automatically. (Skip to 7.)
6)Press the POWER button to turn the printer off.
7)Make a test print in service mode to check the destination country setting.
After resetting the EEPROM data or writing data to the EEPROM after it has been reset, be sure to print and check the data settings.