Part 1: Safety and Precautions |
2.1.5 Ink electroconductivity
The ink used in the BJ cartridge can conduct electricity. If any ink leaks into the printer's mechanical parts, use paper towels, etc., to wipe clean. If the ink leaks onto the printer's electrical components, use tissue paper, etc., to wipe clean. If the ink gets to the IC chips on the PCB, or if it is too difficult to thoroughly clean off the ink, replace the respective parts.
Never connect the printer's power cord if ink has leaked inside the printer.
It may damage the circuitry.
2.2Ink Tank Handling
2.2.1Unpacking the ink tank
Do not unpack the ink tank until you are ready to use it.
Before installing it in the color BJ cartridge, remove the cap covering the ink outlets.
Figure 1-10 Removing the Ink Tank Cap
2.2.2 Preventing clogging
To prevent poor ink suction due to clogging of the joints in the BJ cartridge, never touch the ink tank's ink outlets. After removing the cap from the ink tank, promptly install the ink tank in the BJ cartridge to prevent the nozzles from clogging due to
|
|
Photo Cyan Ink Outlet | Cyan Ink Outlet |
Photo Magenta Ink Outlet | Magenta Ink Outlet |
Photo Yellow Ink Outlet | Yellow Ink Outlet |
Yellow Ink Outlet
Magenta Ink Outlet
Cyan Ink Outlet
