|
| Part 5: Maintenance | |||
|
|
|
|
|
|
| Pin No. | Signal | IN/OUT | Function | |
|
|
|
| ||
| 19 | ID1CL/ELMCL | OUT/IN | Color head index 1 detection/magenta |
|
|
|
|
| pulse (ID1CL output and /ELMCL input) | |
20 | HEATEPH | IN | Photo head heat enable | ||
21 | HEATECL | IN | Color head heat enable | ||
22 | IDATAPH | IN | Photo head print data | ||
23 | IDATACL | IN | Color head print data | ||
24 | RANKPH | OUT | Photo head rank resistance detection | ||
25 | RANKCL | OUT | Color head rank resistance detection | ||
26 | LTRST | IN | Latch reset | ||
27 | TSKPH | OUT | Photo head temperature sensor (diode) output voltage | ||
28 | TSKCL | OUT | Color head temperature sensor (diode) output voltage | ||
29 | INK | OUT | |||
|
|
|
|
|
|
| BLACK (Cartridge Cable) | ||||
|
|
|
|
|
|
| Pin No. | Signal | IN/OUT | Function | |
|
|
|
| ||
| 1 | VH | OUT | Head drive voltage (20.0 ± 0.3VDC) |
|
2 | TSABK | OUT | Black head temperature sensor (diode) drive voltage | ||
3 | ID2BK | IN | Black head index 2 detection | ||
4 | SUBHBK | OUT | Black head | ||
5 | ID1BK | IN | Black head index 1 detection | ||
6 | VDDH | OUT | Head logic drive voltage | ||
7, 8 | GND | ... | GND | ||
9 | HEATEBK | OUT | Black head heat enable | ||
10 | INVBK | OUT | Black head print data block output signal output sequence | ||
|
|
|
| inversion (permanently disabled) | |
11 | ODDE | OUT | Black head and color head odd nozzle, and ink optimizer | ||
|
|
|
| and photo head even nozzle heat enable | |
12 | EVENE | OUT | Black head and color head even nozzle, and ink optimizer | ||
|
|
|
| and photo head odd nozzle heat enable | |
13 | BE0 | OUT | Print data block output signal generation 1 | ||
14 | VH | OUT | Head drive voltage (20.0 ± 0.3VDC) | ||
15 | BE1 | OUT | Print data block output signal generation 2 | ||
16 | IDATABK | OUT | Black head print data | ||
17 | BE2 | OUT | Print data block output signal generation 3 | ||
18 | DCLK | OUT | Print data transmission clock | ||
GND | ... | GND | |||
22 | LTCLK | OUT | Print data latch timing specifier | ||
23 | ELBK | OUT | Black head | ||
24 | RANKBK | IN | Black head rank resistance detection | ||
25 | LTRST | OUT | Latch reset | ||
26 | TSKBK | IN | Black head temperature sensor (diode) output voltage | ||
27 | VH | OUT | Head drive voltage (20.0±0.3VDC) | ||
28 | Not used | ... | ... |
| |
|
|
|
|
|
|