Part 5: Maintenance |
2)Insert the measuring sheet into the manual paper feed slot. With the platen held down in position, align the left of the measuring sheet with the paper guides on the printer. Then, insert the measuring sheet until its leading edge is hooked on the spurs (see figure below) taking care not to deform the spurs.
Measuring Sheet
Push here
Figure 5-10 Measuring Sheet Setting 1
3)Gently press down on both ends of the platen, and then quickly release your hands. Repeat this two or three times to stabilize the platen position. Be sure to carry out this step. Otherwise, the head gap cannot be measured correctly.
Push down gently | Release quickly |