Part 3: Operating Instructions |
1.3.3 Installing the BJ cartridge
1) Removing the BJ cartridge protectors
Remove the BJ cartridge from the package, then remove the cap and tape on the nozzles, as shown in the figure.
Head Cap | Protective Tape |
Figure 3-5 Removing Cap and Tape from BJ Cartridge
Do not reuse the cap and tape. It can clog the nozzles or mix the ink colors.
Do not touch the nozzles when removing the tape as doing so may result in the head becoming scratched and dirt adhering to the head, resulting in poor printing.
Do not shake the BJ cartridge after removing the cap and tape as doing so may result in ink spillage.
2) Installing the BJ cartridge
Open the printer’s front cover and install the BJ cartridge on the carriage. Install the
After installing the cartridge, press the REPLACE button. The beeper sounds once and, after about 15 seconds, the carriage returns to the capping position.
REPRACE Buttonor | ||
| ||
|
|