Manuals / Canon / Photography / Digital Camera

Canon PowerShot S45 Setting the Aperture continued, Functions Available in Each Shooting Mode p

Models: PowerShot S45

1 187

Page 77

Setting the Aperture (continued)

•If the shutter speed shows in red on the LCD monitor, the image is under exposed (insufficient light) or overexposed (too much light). Adjust the aperture value using B or A on the multicontroller until the shutter speed display turns white.

•Some aperture values may not be available with certain zoom positions.

• Functions Available in Each Shooting Mode (p. 180)

• Please note that camera shake becomes a factor at low shutter speeds. If the camera shake warning appears in the LCD monitor, secure the camera to a tripod before shooting.

•In this mode, the shutter speed with synchronized flash is 1/60 second to 1/250 second. The aperture value setting may therefore be changed automatically to match the synchronized flash speed even if its value was set previously.

Aperture Value Display

The larger the aperture value, the smaller the lens aperture.

F2.8	F3.2	F3.5	F4.0	F4.5	F5.0	F5.6	F6.3	F7.1	F8.0

•For the correlation between aperture value and shutter speed, see page 70.

Page 77

Image 77

Canon PowerShot S45 Setting the Aperture continued, Functions Available in Each Shooting Mode p, Aperture Value Display

Contents

Camera User Guide Please start by reading the Precautions on page 4 of this manualENGLISH Connecting the Camera to a Computer Installing the SoftwareUsing the Printer and Printing Shooting with the CameraCharging the Date/Time Battery Language SettingCamera Body Temperature About the LCD MonitorQuestion? Look Here First Symbols UsedAbout this Camera User Guide Connecting About the Thumb IndexQuick Start Preparing the Camera, Basic FunctionsCustomizing the Camera My Camera Settings Table of ContentsShooting - Letting the Camera Select Settings Components GuideShooting - Selecting Particular Effects ReplayingErasing Warranty Limitations Safety PrecautionsRead This First Please ReadWarnings Use of power sources not expressly recommended for this equipment may lead to overheating, distortion of the equipment, fire, electrical shock or other hazards. Use only the recommended power accessories Cautions Avoid Condensation Related ProblemsPreventing Malfunctions Avoid Strong Magnetic FieldsInstall the Battery p Charge the Battery pInstall the CF card p Quick StartShoot p Focus pView the recorded image p autofocus is setComponents Guide Front ViewDC Coupler Cable Cover p CF Card Slot/Battery Cover p. 17 Back / Bottom ViewStrap Mount Viewfinder p Attaching the Wrist Strap Tripod SocketLower Indicator ControlsUpper Indicator Auto p Shooting Mode DialImage Zone Creative ZoneMoving the cursor on the LCD monitor up and down Operating the MulticontrollerMoving the cursor on the LCD monitor left and right Confirming a menu selection or moving the AF frameAlign the edge of the battery pack with Charging the Battery Packthe battery in the direction of the arrow Battery charger model names and types vary by region For CB-2LTBattery Pack Handling Precautions Installing the Battery Pack Installing the Battery Pack continued Battery Low StatusSee Battery Performance p ChangeSlide the CF card slot/battery cover in Installing a CF CardTurn off the camera p the direction of the arrow to open theCF Card Handling Precautions Using the Soft Case Optional3 Select the Set up menu using A on the multicontroller Setting the Date / Time4 Select Date/Time using C or D on the multicontroller, then press Turn on the camera pSetting the Date / Time continued Setting the Language Slide the power/replay lever to the right again Turning the Power On / OffBasic Functions Turning On/Off the Camera in Shooting ModeTurning on the camera without the startup sound and image Power-saving Function1 Slide the power/replay lever to the right p Switching between Shooting and Replaying1 Open the lens cover p 2 Shooting ModePressing the shutter button halfway Power OffPreparing the Camera, Basic Functions Shooting Mode2 Shooting Mode Using the LCD Monitor2 Replaying Mode MF Manual Focus Indicator Aperture Value Recordable Images or Information Displayed on the LCD Monitor2 Shooting Mode Shutter Speed Recordable Movie Time Spot AE Point sec Frame AF Frame2 Replaying Mode Using the LCD Monitor continuedFile Number Image Number Shooting and Total Date / Time Display Image Total Aperture Value Shutter Speed Histogram Movie LengthOverexposure Warning Notice Concerning ShootingAbout the Histogram Shooting with an Off-Center AF Frame Selected Using the Viewfinder to ShootImage Seen in Viewfinder vs. Recorded Image Pressing Fully Pressing the Shutter ButtonPressing Halfway AF-assist Beam Pressing the Shutter Button continuedTelephoto / Wide Angle Using the Zoom Focal LengthDigital Zoom to zoom out2 Select a menu item using C or D on the multicontroller Selecting Menus and Settings3 Select setting contents using B or A on the multicontroller button or the2 Switch between menu tabs using B or A on the multicontroller Selecting Settings by Pressing the Button3 Select a menu item using C or D on the multicontroller 4 Select setting contents using B or A on the multicontrollerButton Menu Settings and Factory DefaultsSelecting Menus and Settings continued Available SettingsSet up Available SettingsMenu Item MenuCustomizing the Camera My Camera Settings Changing My Camera Settings3 Select the My Camera menu using A on the multicontroller 4 Select a menu item using C or D on the multicontrollerbutton closes the menu and makes the settings take 5 Select setting content using B or A on the multicontrollerPress the buttonSlide the power/replay lever Registering My Camera Settings4 Select the My Camera menu using A on the multicontroller Registering CF Card Images and Soundsappears Start-up Image File Format of My Camera SettingsStart-up Sound, Operation Sound, Selftimer Sound and Shutter Sound Auto Mode Shooting - Letting the Camera Select Settings1 Check that the camera is in Shooting mode p Turn the shooting mode dial toFunctions Available in Each Shooting Mode p Auto Mode continuedReviewing an Image Right after Shooting 2 Select OK using B or A on the multicontroller and pressReviewing the Image Changing the Recording Format Right after ShootingChanging the Image Display Duration 2 Select a Review setting and press the buttonIn the Rec. menu, select Review3 Select L* 2272 x 1704 using C or D on the multicontroller Changing the Resolution and Compression1 Turn the shooting mode dial to the desired Shooting mode 2 Press the / / buttonSelect the resolution you wish to set Types of CF cards and resolution p Volume of an image approximate p.173Resolution and Compression after Change Settings change to those of the next mode1 Turn the shooting mode dial to , , , or Changing the File Format2 Press the 3 Select L* 2272 x 1704 using C or D on the multicontrollerShooting - Letting the Camera Select Settings 4 Select RAW using B or A on the multicontroller5 Press or the / / button 6 Shoot the image Setting the Red-eye Reduction Function Using the Flash1 Press the button to switch between flash modes Shoot the image1 In the Rec. menu, set Slow Synchro to On Setting the Slow Synchro1 In the Rec. menu, set Red-eye to On Landscape Mode Portrait ModeTurn the shooting mode dial toFast Shutter Night Scene ModeTurn the shooting mode dial to Turn the shooting modeTurn the shooting Slow Shuttermode dial to Functions Available in Each Shooting Mode pFraming a Subject Stitch Assist ModeShooting 2 Select the shooting sequence using B orA on the multicontroller and press 3 Shoot the first image4 Compose and shoot the second image so that it overlaps the first 5 Use the same procedures to shoot the remaining frames6 Press after the last shot Minor discrepancies in the overlap can be corrected with the softwareTurn the shooting mode dial to Movie ModePress the shutter button all the way Press the shutter button all the way to stop recording the moviebutton to turn the LCD monitor on Macro ModePress the Press theDrive mode using C or D on Self-Timer3 Select or using B or A on the multicontroller and press 2 the multicontrollerDigital Zoom See Selecting Menus and Settings p1 Press the Turn the shooting mode dial to any Shooting mode except for3 Select Continuous Shooting4 Press the shutter button halfway to lock the focus Press the shutter button all the way to shootShooting - Selecting Particular Effects Program AE2 Shoot the image Turn the shooting mode dial toDifferences and Similarities between theandModes Program AE continuedFunctions Available in Each Shooting Mode p 2 Select a speed using B or A on the multicontroller Setting the Shutter Speed3 Shoot the image Turn the shooting mode dial toShutter Speed Display Setting the Shutter Speed continuedFunctions Available in Each Shooting Mode p 2 Select a value using B or A on the multicontroller Setting the ApertureTurn the shooting mode dial to 3 Shoot the imageAperture Value Display Setting the Aperture continuedFunctions Available in Each Shooting Mode p 3 Select an aperture value using C or D on the multicontroller 2 Select a shutter speed using B or A on the multicontroller4 Shoot the image Manually Setting the Shutter Speed and ApertureSelecting an AF Frame When the Shooting Mode dial is set to, , , orPress PressPress When the Shooting Mode dial is set to , , orPress 4 Shoot the imageRegarding the AF Frame Selecting an AF Frame continuedbutton to turn on the LCD monitor Switching between Light Metering Modesbutton to select the 2 metering mode4 Select the Center or AF Point option then press the button 3 In the Rec. menu, select Spot AE Point5 Shoot the image See Selecting Menus and Settings pAdjusting the Exposure 2 Select * Auto using C or D on the multicontroller Setting the White Balance3 Select the desired setting using B or A on the multicontroller 4 Press or the / / button 5 Shoot the imageAuto using C or D on the Setting a Custom White Balance2 multicontroller 5 Press or the / / button6 Shoot the image Setting the White Balance continuedChanging the Photo Effect 2 Select * Effect Off using C or D on the multicontroller3 Select the desired setting using B or A on the multicontroller buttonSharpness Contrast4 Press or the / / button 5 Shoot the image SaturationChanging the ISO Speed 2 Select * ISO Speed using C or D on the multicontroller3 Select the desired setting using B or A on the multicontroller 1 Press the4 Expand or contract the range using B or A on the multicontroller 2 Select * BKT-Off using C or D on the multicontrollerAuto Exposure Bracketing AEB Mode 1 Press theShooting - Selecting Particular Effects 6 Shoot the imageFocus Bracketing Focus-BKT Mode Shooting - Selecting Particular Effects Selecting an AF frame p Switching Between Light Metering Modes p Locking the Exposure Setting AE LockThe AE lock function cannot be used when the LCD monitor is off multicontroller cancels the FE lock Locking the Flash Exposure Setting FE Lockicon appears on the LCD monitorCompensating the Flash Adjustment +/- Flash Switching between the Built-in Flash Adjustment SettingsAdjust the compensation using B or A Select Flash Adjust from theCompensating the Flash Output Flash Output using C or D onAdjust the compensation using B or A Switching between the Built-in Flash Adjustment Settings continuedcurtain setting Switching the Timing at which the Flash Firescurtain setting Image shot with the 1st4 Select the number of shots using B or A on the multicontroller 2 Select an interval time using B or A on the multicontrollerShooting Images at Set Intervals Intervalometer 1 Select Intervalometer from the Rec. menudown regardless of the power-saving function settings Press the shutter buttonthe interval shooting session will be cancelled card slot/battery coverShooting with Focus Lock Shooting Problem Subjects for the AutofocusAim the AF frame at an object at a similar distance to the 2 subject you wish to shoot2 pressed and press the Press the shutter button halfway to lock the focus. Keep it1 Press the button to turn on the LCD monitorPress and hold the Shooting in Manual Focus Modebutton, then use 2 C or D on the multicontrollerFocus the camera with the manual focus Using the Manual Focus in Combination with the Auto Focusthe current focusing point PressSettings that can be saved to the mode Saving Custom Settings2 Set the setting contents you wish to save Select Save settings from the1 Select Auto Rotate in the Set up menu Setting the Auto Rotate FunctionSelect On and press the See Selecting Menus and Settings p1 In the Set up menu, select File No. Reset Resetting the File Numbers2 Select On or Off and press the button See Selecting Menus and Settings p2 Move between images using B or A on the multicontroller Slide the power/replay lever to theDisplaying Images Individually Replaying1 Slide the power/replay lever to the right Cancelling the Magnified DisplayMagnifying Images 2 Slide the zoom lever towardViewing Images in Sets of Nine Index Replay Slide the power/replay lever to the rightPress the buttonbutton while in single replay p. 105 or index Jumping Between Images1 replay p 2 The displayed images change3 Select using B or A on the multicontroller and press 2 Select a movie using B or A on the multicontroller and pressPausing and Resuming Play Viewing MoviesEditing Movies 7 Select Overwrite or New File using B or A on the multicontroller 6 Select Save using C or D on the multicontroller1 Selectmenu.Rotate from the Replay Rotating Images in the Displaypress See Selecting Menus and Settings pAttaching Sound Annotations to Images 2 Select Record using B or A on the multicontroller, then pressPlaying back the Sound Annotations Erasing the Sound AnnotationsWhen the slide show is over, press the B or A on the multicontroller 3 Select Start using C or D on thePausing and Resuming a Slide Show Automated Playback Slide ShowSelecting Images for Slide Shows 3 Choose Select using D, and B or A on the multicontroller and press1 Display the slide show menu p 4 Mark images to include in the showSelect Set up using B or A on the Adjusting the Play Time and Repeat Settings3 Select Play Time or Repeat using C or D on the multicontroller 4 Select a setting using B or A on the multicontrollerPress the The set up menu closesbutton The display interval may vary somewhat for some images1 In the Replay menu, select Protect and press Protecting ImagesSee Selecting Menus and Settings p pressErasing Images Individually 3 Select Erase using B or A on the multicontroller and pressErasing 1 Set the camera to the replay mode p1 In the Replay menu, select Erase all and press Erasing All Images2 Select OK using B or A on the multicontroller and press See Selecting Menus and Settings pFormatting a CF Card 1 In the Set up menu, select Format and press2 Select OK using B or A on the multicontroller and press See Selecting Menus and Settings pPrinting About PrintingTransfer Settings Print Settings for Direct Print FunctionDPOF Print Settings Direct Print Function DPOF SettingsSelecting from the Print Order Menu Turns the menu on/off Reset pNumber of copies Borders pConnecting to a Direct Print Function Compatible Printer Connecting the Camera to a PrinterConnect the camera and printer using the direct interface cable 1 Turn off the camera p4 Press the printer’s ON/OFF button to turn on the power Connecting Bubble Jet Printer to the CameraConnect the camera and printer using the cable When the printer is properly connected to theConnecting the Camera to a Printer continued 3 Choose Print using C, D, B or A on the multicontroller and press 1 Choose an image using B or A on the multicontroller and pressSelecting the Number of Copies p Setting the Print Style p PrintingPrinting continued Cancel PrintingPrinting Errors Selecting the Number of Copies Setting the Print Settings Direct Print FunctionSetting the Print Style press again 1 In Replaying mode, press and choose Trimming using C or D on the Setting the Printing Area Trimmingmulticontroller and press again Press theSetting the Portion of the Trimming Frame 3 Press the button to close the setting menu2 Trim the Image Changing the Size of the Trimming Frame2 Select Order using B or A on the multicontroller and press Print Settings DPOF Print SettingsSelecting Images for Printing 1 In the Replay menu, select Print Order and pressSingle Images 3 Select images for printingAll the Images on a CF Card Print Settings DPOF Print Settings continuedSelect Standard, Index or Both Print TypeSetting the Print Style File No DatePrint Settings DPOF Print Settings continued Press the2 Select Reset using B or A on the multicontroller and press Resetting the Print SettingsSelect OK using B or A on the 3 multicontroller and press2 Select Print using C, D, B or A on the multicontroller and press Printing with DPOF Print Settings3 Set the print style settings as required 4 Select OK using C, D, B or A on the multicontroller and pressRestarting Printing Selecting Images for Transferring Image Transfer Settings DPOF Transfer Order1 In the Replay menu, select Transfer Order and press 2 Select Order using B or A on the multicontroller and pressPress the 3 Select images for transferringbutton Single ImagesViewing Images on a TV Set 4 Turn on the TV and switch it to Video modeterminal on the camera 5 Turn on the camera in Shooting mode or Replaying mode pDownloading Images to a Computer Downloading Directly from a CF CardUSB port and the camera’s terminal Connecting the Camera to a Computer Via the USB Cable1 Connect the supplied USB interface cable to the computer’s Set Up menu, select Communication Setting the Communication Mode3 Select Normal or PTP using B or A on the multicontroller Check that the camera is not connected to the computerList of Menu Options and Messages Rec. MenuLCD monitor after the shutter button is AppendixSets the output of the AF-assist beam Sets the images that will be transferred Replay MenuSet up menu and each sound Set up MenuOff Still beeps to warn of an error automatically powers down after ashutter button is pressed all the way Set up Menu continuedSets whether or not images shot with AppendixSets how file numbers are assigned to Sets the video output signal standard Set up Menu continuedSets the start-up sound when you turn My Camera MenuSets the start-up image when you turn For details, see the table below The settings of eachMy Camera Menu continued My Camera menu3 Select OK using B or A on the multicontroller, then press Resetting the Settings to Default1 Turn on the camera 2 Press the button for longer than 5 secondsList of Messages because the image has some sound file recorded in an No Paper No print headNo print head is installed in the printer Appendices Using an AC Adapter Kit OptionalAlways turn the camera’s power off before connecting or disconnecting the compact power adapter p Using a Car Battery Charger Optional Appendix Using the Waterproof Case OptionalThe display location cannot be moved up and down in magnified replay Camera Care and Maintenance Insufficient battery voltage TroubleshootingClose the CF card slot/battery cover, then turn off the Appendixthe ISO Speed p Troubleshooting continuedSwitching between Light Metering Modes p Set the exposure compensation to a negative - setting Switching between Light Metering Modes pSet the video system to the appropriate setting, NTSC or AppendixPowerShot S45 SpecificationsImage output to Card Photo Printer CP-100 / CP-10 and Bubble Jet Creative zone Program, Shutter Speed Priority, Aperture PriorityImage zone Portrait, Landscape, Night Scene, Fast Shutter, Slow Specifications continued Battery Performance Battery Pack NB-2L at full chargeApproximate Image File Sizes Estimated CF Cards and Estimated Capacities Recordable ImagesMovie MoviesBattery Charger CB-2LT / CB-2LTE Battery Pack NB-2LCompact Power Adapter CA-PS700 Car Battery Charger CBC-NB2 OptionalWeight DimensionsCompactFlash Card Card slot typeIndex Appendix Page Canadian Radio Interference Regulations FCC NoticeRéglementation canadienne sur les interférences radio Digital Camera, Model PC1033Functions Available in Each Shooting Mode Default setting Setting selection is possible XXXXXXX CDI-E064-0102002 CANON INC PRINTED IN JAPAN