Canon PowerShot S45 Continuous Shooting, Select, Press the shutter button all the way to shoot

Continuous Shooting

Use this mode to shoot successive frames while the shutter button is fully pressed.

Standard	Use this mode to view the images as you shoot continuously. The
Continuous Shooting	shutter interval is longer in this mode than in	mode.
High Speed	Use this mode to shoot continuously with a short shutter interval.
Continuous Shooting	You cannot check images while shooting continuously.

1 Press the	/	/	button.
Select	* (Drive mode) using C or D on
2 the multicontroller.
* The current setting is displayed.
3 Select	or	and press	.

4 Press the shutter button halfway to lock the focus.

5	Press the shutter button all the way to shoot.
	• Shooting will stop when the shutter button is released.
	• The shooting speed is as follows.*
	When	is selected:	Approx. 1.5 frames per second
	When	is selected:	Approx. 2.5 frames per second

* Large/Fine, LCD monitor off mode. (These figures reflect Canon’s testing standard. The actual figures will vary according to the shooting conditions and settings.)

• Some settings are not available with certain Shooting modes. Please refer to Functions Available in Each Shooting Mode (p. 180)

•The interval between frames may lengthen somewhat when the internal memory becomes full.

•The flash can be used, but the interval between images will lengthen to accommodate the flash recharge time.

66