Canon PowerShot S45 manual Trim the Image, Press the button to close the setting menu

Setting the Print Settings (Direct Print Function) (continued)

2 Trim the Image.

Changing the Size of the Trimming Frame

•Slide the zoom lever toward or .

•The trimming frame can be changed to a minimum selection of approximately half the displayed image or a maximum selection that is virtually the same size as the image.

•You can cancel the trimming setting by sliding the zoom lever toward again when the trimming frame is already set to the maximum size.

•When printing an image that has been magnified using the trimming option, the image quality may become coarser and grainier depending on the magnifying rate. With direct print function compatible printers, the trimming frame displays in red.

Setting the Portion of the Trimming Frame

•Move the trimming frame using C, D, B or A on the multicontroller.

Rotating the Trimming Frame

•You can rotate the trimming frame by pressing the button.

3 Press the button to close the setting menu.

Trimming Frame

•The trimming setting only applies to one image.

•The trimming setting is cancelled with the following operations.

-When you set the trimming settings for another image.

-When you close the Print mode (when you turn the camera power off, change the camera mode, or detach the direct interface cable).

-When you try to expand the trimming frame beyond its maximum size.

• The selected Image Settings, Paper and Border setting determine the shape of the trimming frame.

•Please use the LCD monitor to set the trimming settings. The trimming frame may not display correctly on a TV monitor.

134