Checking Jumper Settings
The following illustration shows the location of the mainboard jumpers. Pin 1 is labeled.
Jumper Settings
Jumper | Type | Description | Setting (default) | |||||
JP1 | Keyboard Power |
| JP1 | |||||
|
| On Selector | board Power On | 1 | ||||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||
|
|
|
|
| ||||
|
|
|
|
| ||||
|
|
|
|
|
|
|
| |
|
|
| board Power On |
|
|
|
|
|
JP4 | Clear CMOS |
| JP4 | |||||
|
| jumper | 1 |
|
|
|
| |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
JP1: Keyboard Power On Selector
If you enable the keyboard power on feature, you can use hot keys on your keyboard as a power on/off switch for the system.
Note: The system must provide 1A on the +5VSB (+5V Standby) signal before using the Keyboard Power On function.
JP4: Clear CMOS Jumper
Use this jumper to clear the contents of the CMOS memory. You may need to clear the CMOS memory if the settings in the Setup Utility are incorrect and prevent your mainboard from operating. To clear the CMOS memory, discon-
7
