Refer to the following for information on connecting the mainboard’s optional devices:
FP_AUD1O: Front panel MIC/Speaker Out header
This header allows the user to install auxiliary
Pin | Signal Name | Pin | Signal Name |
|
|
|
|
1 | AUD_MIC | 2 | AUD_GND |
3 | AUD_MIC_BIAS | 4 | AUD_VCC |
5 | AUD_FPOUT_R | 6 | GND |
7 | HP_ON | 8 | KEY |
9 | AUD_FPOUT_L | 10 | GND |
|
|
|
|
USB1: Extended USB header
The mainboard has USB ports installed on the rear edge I/O port array. Some computer cases have a special module that mounts USB ports at the front of the case. If you have this kind of case, use auxiliary USB connectors USB1 to
17
