Optimus COOLPIXS630BK, COOLPIXS630RED user manual Error Messages, 148, Display Problem Solution

Error Messages

The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them.

	Display	Problem		Solution	A
	O	Clock not set.	Set clock.		125
	(blinks)
	B	Battery is running low.	Prepare to charge or change battery.		14, 16
	N	Battery exhausted.	Charge or replace battery.		14, 16
	Battery exhausted.
			Turn off camera, and allow battery to
			cool down before resuming use.
			After five seconds, this message will
			disappear, the monitor will turn off,
	P	Battery temperature is	and the power-on lamp will blink		17
	Battery temperature high	high.	rapidly. After the lamp blinks for three
			minutes, the camera will turn off
			automatically, but you can also press
			the power switch to turn it off
			manually.
	Q	Camera cannot focus.	•	Refocus.	26, 27
	(blinks red)		•	Use focus lock.	111
	P	Camera cannot	Wait until message clears from
	Please wait for the	perform other
			display automatically when		27, 77
	camera to finish	operations until
			recording is complete.
	recording.	recording is complete.
	N	Write-protect switch is	Slide the write-protect switch to
	Memory card is write				21
		in “lock” position.	“write” position.
	protected.
	P		• Use an approved card.		142
	This card cannot be used.	Error accessing	• Check that connectors are clean.		20
	P	memory card.	• Confirm that memory card is		20
	This card cannot be read.			correctly inserted.
	P
Technical	Card is not formatted.	Memory card has not	Choose Yes and press the k button
	Yes
	Format card?	been formatted for use	to format memory card.		21
	No	in this camera.
Notes
			• Choose smaller image mode.		100
			• Delete pictures or sound files.		28, 80,
	N	Memory card is full.	•		84, 118
	Out of memory.			Replace memory card.	20
			• Remove memory card and use		20
				internal memory.

148