Optimus S630 Motion Detection, Press the d button M z Setup menu A122 M U Motion detection

Basic Camera Setup: The Setup Menu

Shooting, Playback and Setup Menus

UMotion Detection

Press the d button M z (Setup menu) (A122) M U Motion detection

Enable motion detection to reduce the effects of camera shake and subject

movement when shooting still pictures.

Auto (default setting)

When camera detects the movement of the subject or camera shake, the shutter speed will be increased for reducing the effects of them.

However, motion detection does not function in the following situations.

•When fill flash is used

•When the ISO sensitivity (A108) is set to Fixed range auto or fixed at a specific value, or when Multi-shot 16 (A105) is chosen in auto mode

•When specific scene modes are used (A36 to 41)

•When sport continuous mode is selected

•When high sensitivity mode is selected

Off

Motion detection will not be applied.

When motion detection is enabled, the current setting is displayed during shooting (when Off is selected, an icon for the current setting is not displayed)(A6, 23). The motion detection icon will glow green when the camera detects any vibration and increases the shutter speed.

BNotes on Motion Detection

•Motion detection may be unable to completely reduce the camera shake and subject movement in some situations.

•Motion detection may not function if the subject exhibits significant movement or is too dark.

132• The pictures taken may become somewhat grainy.