Microsoft K7S5A, mainboard Advanced Setup Page

Advanced Setup Page

Use this page to set more advanced information about your system. Take

some care with this page. Making changes can affect the operation of your

computer.

AMIBIOS SETUP – ADVANCED SETUP

Quick Boot Enabled

1st Boot Device IDE-0

2nd Boot Device Floppy

3rd Boot Device CDROM

Try Other Boot Devices Yes

S.M.A.R.T. for Hard Disks Disabled

BootUp Num-Lock On

Floppy Drive Swap Disabled

Floppy Drive Seek Disabled

Password Check Setup

Boot To OS/2 > 64MB No

L1 Cache Enabled

L2 Cache Enabled

System BIOS Cacheable Enabled

Timing Setting Mode Normal

SDR/DDR CAS Latency SPD

Auto Detect DIMM/PCI Clk Disabled

Clk Gen Spread Spectrum Disabled

ESC : Quit

↑↓←→

: Select Item

F1 : Help PU/PD/+/- : Modify

F5 : Old Values (Shift)F2 : Color

F6 : Load BIOS Defaults

F7 : Load Setup Defaults

If you enable this item, the system starts up more quickly be elimination some

of the power on test routines.

Use these items to determine the device order the computer uses to look for

an operating system to load at start-up time.

If you enable this item, the system will also search for other boot devices if it

fails to find an operating system from the first two locations.

Enable this item if any IDE hard disks support the S.M.A.R.T. (Self-Monitoring,

Analysis and Reporting Technology) feature.

This item determines if the Num Lock key is active or inactive at system start-

up time.

If you have two diskette drives installed and you enable this item, drive A be-

comes drive B and drive B becomes drive A.