NETGEAR FSM726 APPENDIX C: Default Settings

Page 23 of 23

APPENDIX C: Default Settings

This appendix provides the default settings for the NETGEAR Model FSM726 Managed Switch.

Feature FSM726 Default Setting

Port Speed Auto-negotiation

Port Duplex Auto-negotiation

Flow Control (half duplex) Enabled

Flow Control (full duplex) Enabled

Broadcast Storm Control Enabled (3000 packets per second)

Gigabit ports RJ-45 enabled

IP Configuration DHCP enabled

Password protection Disabled

User Name Admin

Password 1234

VLAN All ports belong to Default VLAN (VLAN 1) as untagged ports

IP Multicast Filtering Disabled

Spanning Tree Protocol Enabled

Fast Link Disabled

Traffic Prioritization

802.1p

DiffServe

Optimized for flow control, all ports normal priority

0-31 normal priority, 32 – 63 high priority

MAC address aging 300 seconds

SNMP Community Public (you must add application to Host table before switch

will respond to SNMP requests)

Contents

Main Page 1 of 1 Page CONTENTS Figures Tables CHAPTER 1: INTRODUCTION Overview Features Page Package Contents Verify that your package contains the following: CHAPTER 2: PHYSICAL DESCRIPTION Front and Back Panels 10/100 Mbps RJ-45 Ports Gigabit Ethernet Ports (RJ-45 and GBIC module bay) LED Descriptions Console Port Reset Button CHAPTER 3: INSTALLATION Step 1: Preparing the Site Step 2: Installing the Switch Step 3: Checking the Installation Step 4: Applying AC Power Step 5: Connecting Devices to the Switch Step 6: Installing a GBIC Module Step 7: Connecting to the Console Port to Manage the Switch (initial configuration) Page Page APPENDIX A: TECHNICAL SPECIFICATIONS Page APPENDIX B: TROUBLESHOOTING Troubleshooting Chart Additional Troubleshooting Suggestions Page Page 23 of 23 APPENDIX C: Default Settings This appendix provides the default settings for the NETGEAR Model FSM726 Managed Switch.