Power Switch Cover

Install the power switch cover that comes with the TM-T70 onto the printer to prevent

inadvertent changing of the power switch, to prevent tampering, and to improve the appearance of the printer.

To reset the printer when the power switch cover is installed, insert a long, thin object (such as the end of a paper clip) into the hole in the power switch cover and press the power switch.

If an accident occurs with the power switch cover attached, unplug the power cord immediately.

WARNING Continued use may cause fire or shock.

Control Panel

FEED button

PAPER OUT LED

ERROR LED

(POWER) LED

FEED button

Pressing this button once feeds the roll paper by one line. Holding this button down feeds the

roll paper continuously.

LED

PAPER OUT LED

Lights when there is no more roll paper or there is little remaining.

Off when there is a sufficient amount of roll paper remaining.

Flashes when a self-test is in progress.

ERROR LED

Lights or flashes when the printer is offline.

Lights after the power is turned on or after a reset (offline). Automatically goes out after a while to indicate that the printer is ready.

14

Page 14
Image 14
Epson T70 specifications Power Switch Cover, Control Panel, Feed button, Paper OUT LED Error LED