Epson T70 specifications Printing and Cutting Positions, Paper Specifications

Printing and Cutting Positions

Manual-cutter position

Autocutter blade position

Center of the print dotline

Approx. 15

Approx. 29

Paper feed direction

[units: mm (All the numeric values are typical.)]

The values above may vary slightly as a result of paper slack or variations in the paper. Take the notice into account when setting the cutting position of the autocutter.

Paper Specifications

Paper type		Specified thermal paper
Size	Roll paper diameter	83 mm {3.27"} maximum
	Roll paper spool	Inside: 12 mm {0.47"}, Outside: 18 mm {0.71"}
	Take-up roll paper width	80 + 0.5/-1.0 mm
	Paper width	79.5 ± 0.5 mm
Specified roll paper type		NTP080-80
		In U.S.A.: Nakagawa Mfg. (USA) Inc.
		In Europe: Nakagawa Mfg. (Europe) GmbH
		In Southeast Asia: N.A.K. Mfg. (Malaysia) SDN BHD
		(Original paper: TF50KS-E Nippon Paper Industries Co., Ltd.Åj

•Paper must not be pasted to the roll paper spool.

• The remaining amount of the roll paper when a roll paper near-end is detected differs depending on the spool type.

24