Setting the DIP Switches
On this printer, you can make various settings with DIP switches.
For models with the buzzer function, see also "Setting the Buzzer" on page 49.
Setting Procedure
Follow the steps below to change the DIP switch settings.
Before you remove the DIP switch cover, turn the printer off.
Otherwise, a
CAUTION
DIP switch settings are enabled only when the power is turned on or the printer is reset via the interface. If the settings are changed after that, the functions will not change.
1
2
Make sure the power supply for the printer is turned off.
Unscrew the screw to remove the DIP switch cover from the base of the printer.
DIP switch 2
DIP switch 1
3
4
Set the DIP switches, using the tip of a tool, such as a small screwdriver.
Attach the DIP switch cover, and screw it in place.
32
