Chapter 2 Setup 
Drawer Circuitry
Drawer
With shielded
Drawer
Drawer open/close switch
Printer side | User side [Drawer |
2
Setting the Buzzer
Models with the buzzer function can beep the buzzer when the drawer is opened.
The buzzer setting is performed by setting the DIP switches for the buzzer and specifying connector pin numbers to which a command outputs a pulse signal.
DIP | Specified connector pin | ON | OFF | Initial setting | |
switch | |||||
|
|
|
| ||
|
|
|
|
| |
1 | Drawer kick out connector pin 2 | Buzzer beeps. | Buzzer does not | ON | |
beep. | |||||
|
|
|
| ||
|
|
|
|
| |
2 | Drawer kick out connector pin 5 | Buzzer beeps. | Buzzer does not | OFF | |
beep. | |||||
|
|
|
| ||
|
|
|
|
|
Since the buzzer drive signal and the cash drawer drive signal are common in the printer, do not use the same connector pin numbers to output the signal for the buzzer and the cash drawer.
For detailed information about ESC/POS commands, see the ESC/POS Application
Programing Guide.
49
