Q-Logic FC HBA CLI manual Errorsavetargetiidmasettings

A

C – Interactive Exit Codes

Table C-1. Exit Code Descriptions – Interactive Mode (Continued)

Return	Name	Description
Code
231	ERROR_SAVE_TARGET_IIDMA_SETTINGS	Failed to set target link speed
232	ERROR_SET_TARGET_IIDMA_	Target link speed option is not supported with
	UNSUPPORTED	current HBA
233	ERROR_INVALID_IIDMA_SETTINGS	Selected target link speed rate not supported
		with current HBA
234	Reserved	Not used
235	Reserved	Not used
236	Reserved	Not used
237	Reserved	Not used
238	Reserved	Not used
239	Reserved	Not used
240	ERROR_NO_TARGET_SELECTED	Unable to run target beacon because no
		device is selected
241	ERROR_GET_BEACON_STATE	Unable to get the beacon status
242	ERROR_SET_BEACON_STATE	Unable to set the beacon status
243	ERROR_BEACON_UNSUPPORTED	Beacon operation is unsupported
244	ERROR_INVALID_BEACON_PARAMETERS	Beacon settings is invalid
245	Reserved	Not used
246	Reserved	Not used
247	Reserved	Not used
248	Reserved	Not used
249	Reserved	Not used
250	ERROR_GET_HBA_ALIAS	Failed to retrieve HBA alias of the HBA
251	ERROR_UPDATE_HBA_ALIAS	Failed to update HBA alias of the HBA
252	ERROR_GET_PORT_ALIAS	Failed to retried port alias of the HBA
253	ERROR_UPDATE_PORT_ALIAS	Failed to update port alias of the HBA
254	Reserved	Not used
255	Reserved	Not used

SN0054614-00 F C-11