Q-Logic FC HBA CLI manual Abort Changes, Restore Defaults, HBA Parameters All HBAs

A

4 – Interactive Commands HBA Parameters Menu

4.3.1.2.20

Abort Changes

3: HBA Parameters N: Port Number 2: Configure HBA Parameters n: Abort changes

Choose this option to stop without making any changes.

4.3.1.3

Restore Defaults

3: HBA Parameters n: Port Number 3: Restore Defaults

This option is for 4Gb and 8Gb HBAs only. Selecting the Restore Defaults option causes the following warning to appear:

Warning:

Please update the HBA parameters with extreme care.

Incorrectly updating the HBA parameters may render the HBA inoperable.

If you currently have boot device information set up in the HBA parameters, updating the HBA parameters from a file may result in changing that information.

If you wish to preserve the boot device information, please either update the file with the correct boot device settings before the HBA parameters update or re-configure the boot settings after the update.

Do you want to proceed with the operation?

1:Yes

2:No

If you enter 1 to proceed, the system returns a message similar to the following:

Restoring default settings on HBA instance 5 - QLA2462. Please

wait...

HBA Parameters restore completed. Changes has been saved to HBA instance 5.

You must reboot in order for the changes to become effective.

4.3.2

HBA Parameters (All HBAs)

3: HBA Parameters n: All HBAs

When you select this option, the parameters listed in “HBA Parameters (Per HBA Port)” on page 4-22appear for every HBA.

SN0054614-00 F 4-29