Smeg LVF649B Troubleshooting, User instructions, E1 E2 E3 E4 E5 E6, Fault, Description

E1

E2

E3

E4

E5

E6

32

User instructions

6. Troubleshooting

The dishwasher is capable of signalling a number of faults through the simultaneous illumination of several indicator lights, with the following meanings:

FAULT	DESCRIPTION
	Acquastop failure
	The anti-flooding system has been activated.
	The system is tripped in case of water leaks.
	Contact the after-sales service.
	Safety level
	The system which limits the water level inside
	the dishwasher has been tripped. Interrupt the
	program and switch off the dishwasher. Switch
	the dishwasher back on, program it again and
	start the washing cycle. If the problem persists,
	contact the after-sales service.
	Water heating malfunction
	The water is not heated or the heating
	parameters are not correct. Repeat the
	washing program; if the problem persists,
	contact the after-sales service.
	Water temperature monitoring malfunction
	Interrupt the program and switch off the
	dishwasher. Switch the dishwasher back on,
	program it again and start the washing cycle. If
	the problem persists, contact the after-sales
	service.
	Water intake malfunction
	The appliance does not take in water or does
	not do so correctly. Check that the water
	connections are correct, the water intake tap is
	turned on and the filter is not fouled. If the
	problem persists, contact the after-sales
	service.
	Water pump-out malfunction
	The appliance does not pump out the water or
	does not do so correctly. Check that the drain
	hose is not kinked or crushed and that the
	siphon and filter are not fouled. If the problem
	persists, contact the after-sales service.