Q-Logic FC HBA CLI manual Display System Information, Command Line Options -g, -z, and -tp

Section 5

Non-interactive Commands

5.1

Introduction

This section contains the information in the help (to view help, enter the command -h), plus additional explanation and examples. Each command line option is listed, followed by a command description and examples of the command in use and typical responses from the system.

5.2

Display System Information

(Command Line Options -g, -z, and -tp)

When you enter one of these options, general information appears in various formats. For example:

„# scli -gshows Host Information (see section 5.2.1).

„# scli -zshows Host Configuration (see section 5.2.2).

„# scli -tpshows Host Topology (see section 5.2.3).

5.2.1

Host Information

(Command Line Option -g)

The command format to show host information is:

#scli -g

When you enter this option, the following information about the local machine appears:

„Host Name

„OS type

„OS version (patches where applicable)

„SAN target management (SDM) API version

„List of HBAs: HBA model, port number, WWPN, serial number (SN), HBA number (HBA 0–n), and status (online/offline)

„Total number of QLogic FC HBAs detected

SN0054614-00 F 5-1