Code in features Register A.R.T. command | Seagate ST3300831ACE

SeaTools diagnostic software activates a built-in drive self-test (DST S.M.A.R.T. command for D4H) that elimi- nates unnecessary drive returns. The diagnostic software ships with all new drives and is also available at: http://seatools.seagate.com.

This drive is shipped with S.M.A.R.T. features disabled. You must have a recent BIOS or software package that supports S.M.A.R.T. to enable this feature. The table below shows the S.M.A.R.T. command codes that the drive uses.

Code in features
register	S.M.A.R.T. command

D0H	S.M.A.R.T. Read Data
D1H	Vendor-specific

D2H	S.M.A.R.T. Enable/Disable Attribute Autosave

D3H	S.M.A.R.T. Save Attribute Values

D4H	S.M.A.R.T. Execute Off-line Immediate (runs DST)

D5H	S.M.A.R.T. Read Log Sector

D6H	S.M.A.R.T. Write Log Sector

D7H	Vendor-specific

D8H	S.M.A.R.T. Enable Operations

D9H	S.M.A.R.T. Disable Operations

DAH	S.M.A.R.T. Return Status

Note. If an appropriate code is not written to the Features Register, the command is aborted and 0x04 (abort) is written to the Error register.

28	DB35 Series Product Manual, Rev. B

Image 38

Seagate ST3300831ACE, ST3200826ACE, ST3250823ACE, ST3400832ACE manual Code in features Register A.R.T. command

Contents

DB35 Series Page DB35 Series Page Revision status summary sheet DB35 Series Product Manual, Rev. B Contents DB35 Series Product Manual, Rev. B List of Figures Viii DB35 Series Product Manual, Rev. B Introduction DB35 Series DB35 Series Product Manual, Rev. B Drive specifications Drive specificationsSpecification summary table Altitude, nonoperating To 12,192 m Below mean sea level, max Recording and interface technology LBA modeFormatted capacity Start/stop times Physical characteristicsSeek time Typical seek times Power specifications Voltage tolerance Typical current profileConducted noise Environmental specifications Humidity Relative humidity Temperature gradientWet bulb temperature Altitude Nonoperating vibration AcousticsElectromagnetic immunity Operating acoustics Agency certification Safety certificationReliability Electromagnetic compatibility FCC verification Environmental protectionAustralian C-Tick N176 European Union Restriction of Hazardous Substances RoHS DB35 Series Product Manual, Rev. B Configuring and mounting the drive Handling and static discharge precautions Breather filter hole precautions Breather filter hole location Drive as master with a non-ATA-compatible slave Jumper settingsMaster/slave configuration Cable-select option Drive mounting Ultra ATA/100 cable Mounting dimensions-top, side and end view DB35 Series Product Manual, Rev. B ATA interface signals and connector pins ATA interface Supported ATA commands Command name Command code in hex F6H Identify Device command Word Description Value XxxxH Description if bit is set to Bit Word Set Features command 4 S.M.A.R.T. commands Code in features Register A.R.T. command Presales Support Seagate Technology support servicesInternet MySeagate Reseller.seagate.com Technical Support Warranty Service Authorized Service Centers Americas SEAGATE2 +1-405-324-47002 +1-405-324-3339 Call Center Toll-free Direct dialAmericas +1-405-324-47301 +1-405-324-4704 Call Center Toll-free Direct dial FAX / E-mail Toll-Free Support Numbers FAX Services-All Europe toll callCall Center Presales and Technical Support Warranty Service Asia/Pacific Support Services DB35 Series Product Manual, Rev. B Index NumericsPage Page DB35 Series Product Manual, Rev. B Page Seagate Technology LLC