Philips 27964-01A user manual Troubleshooting, Problem, Solution, Connections

Troubleshooting

Problem			Solution
Timer display is indicating	Er 91		Timer software error. Disconnect and reapply power to the unit.
Timer display is indicating	Er 92		Current sensor indicating unit is off when it should be on.
			Contact servicer.
Timer display is indicating	Er 93		Current sensor indicating unit is on when it should be off.
			Contact servicer.
Timer display is indicating	Er 94		Requested session time exceeds maximum time allowed.
Timer display changes to indicate		1.	Bypass plug is not installed, see Electrical Connections.
a tanning time after the timer but-		2.	A non-SunStar® bypass has been used. See Electrical
ton is pressed but lamps do not			Connections.
come on		3.	If remote is being used, other than T-Max® Manager, the exter-
			nal timer may not be activated.
		4.	Remote wiring is incorrect, see the instructions provided with
			the remote interface kit.
My bed is connected to the T-			The auto start feature of the remote system is disabled, see the
Max® Manager remote	system		instructions provided with your remote system.
and when the delay time has
expired the timer display starts
counting down but the bed lights
do not come on
My bed won’t work with the T-		1.	The sunbed must first be set to a unique address, see Remote
Max® Manager remote system			Connections.
		2.	The bypass or terminator plug may be installed in the series in
			an inappropriate location. Plug the bypass plug only into the
			bed at the end of the series.
Timer display continues to show a		1.	T-Max® Manager remote system has not yet been set.
0 after the timer button is pressed		2.	Sunbed address is not set correctly, see Remote Connections.
				27964-01A

25