Philips 27964-01A user manual Installation - Electrical Connections

Installation - Electrical Connections

Electrical Connections

At the rear of the bed, insert canopy plug

(A)into bench socket (B). Connect power cord (C) as described in Pre-Installation Planning. Again, a professional electrician is recommended. The Remote Control Bypass plug is already installed in one of the remote control ports as shown. Your sunbed will not operate without the Remote Control Bypass plug or a remote system connected. Remove the protective film from the acrylic shields. Your equip- ment is now ready for use.

NOTE: Your sunbed is designed to accept an input from a remote control device. The remote control is optional. If you plan on using a remote system refer to Remote Connections.

ATTENTION: Although the Remote Control Bypass plug provided with your sunbed will work wherever a T-Max® ter- minator is called for in the series, the T- Max® terminator will not work as a bypass plug. A bypass plug is needed only when your sunbed is operated without a remote system connected.

Remote Control

Ports

Remote Control

Bypass plug

27964-01A

12