Installation - Assembly Procedures 
Attach Gas Springs
1.With the canopy still raised, slip the bronze bushings into the hole in the clevis brackets on the underside of the canopy arms.
2.Line up both clevis forks and carefully
lower the canopy to engage the clevis | Clevis Bracket | |
forks. Pay special attention when low- | ||
| ||
ering the canopy that the clevis forks |
| |
do not damage the bronze bushings. |
| |
Bronze is excellent for smooth pivot- |
| |
ing applications such as this, but |
| |
tends to be soft compared to the |
| |
steel clevis fork. |
|
3.Lock the clevis forks in place
with the 10mm clevis pins.
4.Secure the clevis pins with the retaining rings.
NOTE: When this assembly is complete, lift and lower the canopy a few times to lubricate the gas springs for optimum per- formance.
8
