Philips 27964-01A user manual Parts List

Parts List

This is a list of parts which may be replaced by the consumer. Care should be taken when replacing anything related to electrical wiring. We recom- mend contacting a professional electrician. When calling for parts, first state your bed model as S- 30SV, S-30SV3F, S-32SV or S-32SV3F, depending on the model. Then refer to this list and preceding illustrations for proper part identification.

Acrylic, Bench Acrylic, Canopy* Ballast (220VAC, 100W) Ballast (220VAC, 400W) Bushing, Bronze 10mm* Body Fan Kit* (optional) Canopy Mounting Arm Capacitor, 75uF Contactor (240VAC, 30A) Cover, Bench

Cover, Canopy

Current Sensor Endcap, Kit (with inserts) Fan, 4” (220VAC, 110cfm) Gas Spring Cover Panel* Gas Spring Set*

Handle

Hardware Kit, Complete* Hardware Kit, Assembly* Hour Counter*

Ignitor (Starter for Face Tanner) Lamp Holder w/ Starter Holder Lamp Holder w/o Starter Holder Lamp Holder, Face Tanner* Lamps*

Pillow*

Profile, Blank*

Remote Connection PCB Remote Control Bypass Plug* Schematic Packet* Silk-screened Profile, English Silk-screened Profile, French Skirt Panel

Starter, K-12(main lamps) Thermostat* (for face tanner) Timer, ADI-HT

Timer Keypad, ADI-HT* Timer Keypad Pushbuttons* Trim Profile, Gray

Wiring Harness, RJ-11 120”

Wiring Harness, Remote PCB to Timer (36”)

* Not shown

Record this information for ease of service:

Date of purchase:

Bench serial number:

Canopy serial number:

27964-01A