BRIDGE PIN
Installation - Assembly Procedures 
Assembly Procedures
Lower Clevis Fork Assembly
1.Insert the larger clevis pin (3/8” x 2 1/64”) through the hole directly below the large hole in one of the stand uprights, as shown.
2.Slide a centering spring, a clevis fork and then another centering spring onto the clevis pin
and insert the pin the rest of the way through the upright.
3.Secure the clevis pin by inserting the straight portion of a bridge pin
through the small hole in the end of the clevis pin.
4.Repeat for the other
stand upright. Make sure the clevis forks point upwards as shown.
STAND UPRIGHT
CLEVIS PIN
CLEVIS FORK
CENTERING SPRING
4
