WARNING

FILLING THE LP GAS CYLINDER:

•Allow only qualified LP gas dealers to properly fill or repair your LP gas cylinder.

•New tanks should be purged prior to filling; inform LP gas dealer if you are using a new tank.

•DO NOT allow the cylinder to be filled beyond 80% capacity. Over-filled tanks can create a dangerous condition. Over-filled tanks can build-up pressure and cause the relief valve to expel propane gas vapors. The vapor is combustible and if it comes in contact with a spark source or flame an explosion causing severe burns, bodily harm, or death could occur.

•Always use a protective cylinder cap when grill is not connected to cylinder.

•If you exchange a cylinder with a qualified exchange program, be sure the cylinder has a Type 1 valve and an over-filling prevention device (OPD).

INSTALLING THE LP GAS CYLINDER ONTO THE GRILL:

 

1.

Check that the cylinder valve is closed by turning the knob

 

 

clockwise.

 

2.

Place the cylinder into the tank holder in the bottom

 

 

of cabinet.

 

3.

Orient the cylinder such that the valve opening faces the side

 

 

burner, and so that the hose is not kinked or damaged.

 

4.

Fully tighten the cylinder clamp underneath tank holder to

 

 

secure tank.

 

5.

Attach or detach regulator to the LP gas cylinder only when

Tank Holder

 

 

cylinder is at rest in tank holder.

 

HOSE AND REGULATOR:

 

Your grill is equipped with a Type 1 connection device with

 

the following features:

 

1.

The system will not allow gas flow from the cylinder until

 

 

a positive connection to the valve has been made.

 

 

NOTE: The cylinder valve must be turned off before any

Wing Bolt

 

connection is made or removed.

 

 

2. A thermal device that will shut off the gas flow if the device is subject to temperatures above 240°F to 300°F (115°C to 150°C). If this should happen, remove the entire regulator assembly and dispose of properly. A replacement regulator assembly can be purchased by contacting customer service at 800-527-0717. The cause of the excessive heat should be determined and corrected before using your grill again.

3. A regulator flow limiting device, when activated, restricts the flow of gas to 10 cubic feet per hour. If the flow limiting device is activated, perform Regulator Resetting Procedure.

REGULATOR RESETTING PROCEDURE

1.Turn burner control knobs to "OFF”, turn off the cylinder valve and disconnect regulator from LP gas tank. Wait approximately two minutes.

2.Reattach regulator and slowly turn cylinder valve back on. The flow limiting device will now be reset.

6

Page 6 Page 8
Page 7
Image 7
Brinkmann 2400 owner manual Filling the LP GAS Cylinder, Installing the LP GAS Cylinder Onto the Grill, Hose and Regulator
Page 6 Page 8

2400 specifications

The Brinkmann 2400 is a versatile and efficient product designed for contemporary outdoor grilling enthusiasts. Renowned for its durability and performance, this grill balances functionality with user-friendly features to elevate any outdoor cooking experience.

One of the standout characteristics of the Brinkmann 2400 is its robust construction. Built from high-quality stainless steel, the grill is designed to withstand the rigors of outdoor use while maintaining an attractive appearance. The materials used ensure resistance to rust and corrosion, thereby extending the lifespan of the grill.

The Brinkmann 2400 boasts a spacious cooking area that allows users to prepare meals for large gatherings. With its multi-burner design, this grill increases cooking efficiency, allowing different dishes to be cooked simultaneously at various temperature settings. The main grilling surface is complemented by a warming rack that keeps food hot without overcooking, perfect for large cookouts or family dinners.

Advanced technologies integrated into the Brinkmann 2400 make it a leader in the market. The grill features an electronic ignition system, ensuring a quick and hassle-free start-up. The heat distribution is optimized through precision-engineered burners that guarantee even cooking across the entire surface. Moreover, the adjustable airflow control allows users to manage cooking temperatures meticulously, accommodating diverse grilling techniques from searing to slow-roasting.

Another notable feature is the grill's portability. The Brinkmann 2400 is designed with foldable side shelves, making it compact and easy to store when not in use. This portability is further enhanced by sturdy wheels that allow for smooth movement, whether it’s placed on a patio or taken on a camping trip.

The user experience with the Brinkmann 2400 is enhanced by additional attributes such as built-in temperature gauges, which allow for precise monitoring without having to lift the lid frequently. The grill also includes ample storage space for grilling essentials, which keeps items organized and within reach.

Overall, the Brinkmann 2400 represents a perfect blend of innovation, quality, and user-centered design, making it an ideal choice for both novice and experienced grill masters looking to impress their guests with delicious and flavorful meals.
Top Page Image Contents