CLEANING AND MAINTENANCE:

•Keep the appliance free and clear of combustible materials, gasoline and other flammable vapors and liquids.

•Keep the ventilation openings of the cylinder enclosure free and clear of debris.

•Visually check burner flames for proper operation (see pictorial in "Burner Assembly/Maintenance" under Proper Care and Maintenance). Spiders or other insects can nest in the burner causing gas blockage.

•For safe grilling and peak performance of your grill, perform these checks at least twice per year or after extended periods of storage.

•Be sure to tighten up all hardware (nuts, bolts, screws, etc.) at least twice per year.

CAUTION! Some parts may contain sharp edges. Wear protective gloves if necessary.

•Remove the cooking grills, heat distribution plates, and burners from inside your grill. Use a brush with hot water and detergent to remove excess residue. NEVER use a commercial oven cleaner. Rinse completely with water. Towel dry and replace all components as described in the assembly instructions.

BURNER ASSEMBLY/MAINTENANCE

•Although your burners are constructed of cast iron, they may rust as a result of the extreme heat and acids from cooking foods. Regularly inspect the burners for cracks, abnormal holes, and other signs of corrosion damage. If found, replace the burner.

•DO NOT obstruct the flow of combustion and ventilation air. Burner tubes can become blocked by spiders and other insects building their nests. Blocked burner tubes can prevent gas flow to the burners and could result in a burner tube fire or fire beneath the grill. To clean the Burner Assembly follow these instructions to clean and/or replace parts of burner assembly or if you have trouble igniting the grill.

1.Turn gas off at control knobs and LP cylinder tank valve.

2.Remove cooking grills and heat distribution plates.

3.Remove cotter pins from beneath each burner "foot" using a screwdriver or needle nose pliers.

4. Carefully lift each burner up and away from valve openings.

5. Use a narrow bottle brush or a stiff wire

bent into a small hook to run through each

 

Debris

burner tube and flame port several times.

 

 

NOTE: Wear eye protection when performing procedure 6.

6.Use compressed air to blow into burner tube and out the flame ports. Check each port to make sure air comes out each hole.

7.Wire brush entire outer surface of burner to remove food residue and dirt.

8.Check burner for damage, if any large cracks or holes are found replace burner.

IMPORTANT: Burner opening must slide over valve nozzle.

9.Carefully replace burners.

10.Replace cotter pin beneath each burner and follow the "Gas Leak Testing" section of this manual. Relight burners to verify proper operation.

11.Replace heat distribution plates and cooking grills.

Valve Nozzle

Burner Orifice

PROPER BURNER OPERATION

14

Page 14 Page 16
Page 15
Image 15
Brinkmann 2400 owner manual Cleaning and Maintenance, Burner ASSEMBLY/MAINTENANCE
Page 14 Page 16

2400 specifications

The Brinkmann 2400 is a versatile and efficient product designed for contemporary outdoor grilling enthusiasts. Renowned for its durability and performance, this grill balances functionality with user-friendly features to elevate any outdoor cooking experience.

One of the standout characteristics of the Brinkmann 2400 is its robust construction. Built from high-quality stainless steel, the grill is designed to withstand the rigors of outdoor use while maintaining an attractive appearance. The materials used ensure resistance to rust and corrosion, thereby extending the lifespan of the grill.

The Brinkmann 2400 boasts a spacious cooking area that allows users to prepare meals for large gatherings. With its multi-burner design, this grill increases cooking efficiency, allowing different dishes to be cooked simultaneously at various temperature settings. The main grilling surface is complemented by a warming rack that keeps food hot without overcooking, perfect for large cookouts or family dinners.

Advanced technologies integrated into the Brinkmann 2400 make it a leader in the market. The grill features an electronic ignition system, ensuring a quick and hassle-free start-up. The heat distribution is optimized through precision-engineered burners that guarantee even cooking across the entire surface. Moreover, the adjustable airflow control allows users to manage cooking temperatures meticulously, accommodating diverse grilling techniques from searing to slow-roasting.

Another notable feature is the grill's portability. The Brinkmann 2400 is designed with foldable side shelves, making it compact and easy to store when not in use. This portability is further enhanced by sturdy wheels that allow for smooth movement, whether it’s placed on a patio or taken on a camping trip.

The user experience with the Brinkmann 2400 is enhanced by additional attributes such as built-in temperature gauges, which allow for precise monitoring without having to lift the lid frequently. The grill also includes ample storage space for grilling essentials, which keeps items organized and within reach.

Overall, the Brinkmann 2400 represents a perfect blend of innovation, quality, and user-centered design, making it an ideal choice for both novice and experienced grill masters looking to impress their guests with delicious and flavorful meals.
Top Page Image Contents