Toshiba SATELLITE U200 manual Replacement Procedures HDD cable/PC card slot

4 Replacement Procedures 4.22 HDD cable/PC card slot

4.Peel the insulator and remove the following screws (on the back of the system board).

• M2⋅3S S-THIN HEAD screw ⋅2

5. Open two latches outward and remove the PC card slot from the system board.

M2⋅3S S-THIN HEAD

Insulator

PC card slot

Latch

Figure 4-37 Removing the PC card slot

Installing the HDD cable/PC card slot

To install the HDD cable/PC card slot, follow the steps below and refer to Figure 4-36 and 4- 37.

1. Install the PC card slot and secure it with the following screws.

• M2⋅3S S-THIN HEAD screw ⋅2

2.Connect the HDD cable to the connector CN1850 on the back of the system board.

3.Install the HDD cable holder on the system board and secure it with the following screw.

• M2⋅4B BIND screw⋅1

4. Arrange the HDD cable on the HDD cable holder in place.

4-58 [CONFIDENTIAL] PORTÉGÉ M500 Maintenance Manual (960-559)