3 Tests and Diagnostics

3.26 Wireless LAN Test Program (Atheros)

3.26 Wireless LAN Test Program (Atheros)

This section describes how to perform the wireless LAN transmitting-receiving test with the test program.

NOTE: Use another computer (with Atheros 11a/g(MB44ag)/Atheros 11a/g(MB62HL)) that can communicate by the wireless LAN as a responder machine to perform this test.

The computer must be booted by the Responder T&D.

In this test, the following items are tested:

(1)SKU check of Module

(2)MAC Address Check

(3)Communication test of 11a mode

(4)Communication test of 11b mode

(5)Communication test of 11g mode

(6)SKU & MAC Check,11a/b/g communication test

NOTE: This test take time until it completes.

To start the Wireless LAN test program, follow the steps below:

NOTE: Before starting the wireless LAN test, make sure the Wireless Communication Switch of the computer is turned on. (The Wireless Communication LED lights orange.)

3-58

[CONFIDENTIAL]

PORTÉGÉ M500 Maintenance Manual (960-559)

Page 178
Image 178
Toshiba SATELLITE U200 manual Tests and Diagnostics Wireless LAN Test Program Atheros