4 Replacement Procedures | 4.18 Harness holder / LAN cable |
4.18 Harness holder / LAN cable
To remove the Harness holder / LAN cable, follow the steps below and refer to Figure
1.Disconnect the LCD cable and LAN cable from the connectors CN5000 and CN4100 on the system board.
2.Remove the following screw securing the harness holder.
• M2.5⋅4B | FLAT HEAD screw | ⋅1 |
|
| M2.5⋅4B FLAT HEAD |
LCD cable
CN5000
LAN cable
CN4100
Figure 4-24 Removing the Harness holder / LAN cable (1)
[CONFIDENTIAL] | PORTÉGÉ M500 Maintenance Manual |