Toshiba SATELLITE U200 manual Optical drive4 Replacement Procedures, Installing the Optical drive

4.6 Optical drive4 Replacement Procedures

Installing the Optical drive

To install the optical drive, follow the steps below and refer to Figure 4-6 and 4-7.

1.	Set the mounting plate and secure it with the following screw.
	•	M2⋅3B	BIND screw	⋅1
2.	Set the pushing plate and secure it with the following screws.
	•	M2⋅3S	S-THIN HEAD screw	⋅2

3.Insert the optical drive firmly into the computer to connect it to the connector on the system board.

4.Secure the optical drive with the following screws.

•	M2.5⋅4B FLAT HEAD screw	⋅1
•	M2.5⋅16B FLAT HEAD screw	⋅1

CAUTION: When inserting the slim select bay module, turn the computer face up and insert it while slightly pressing it down.

Optical drive

PORTÉGÉ M500 Maintenance Manual (960-559) [CONFIDENTIAL] 4-17