
4 Replacement Procedures4.13 Bluetooth module
4.13 Bluetooth module Removing the Bluetooth module
To remove the Bluetooth module, follow the steps below and refer to Figure
1. Remove the following screws to remove the Bluetooth module.
• M2⋅4B | FLAT HEAD screw | ⋅1 |
2.Disconnect the Bluetooth cable from the connector CN4400 on the system board.
3.Disconnect the Bluetooth cable and Bluetooth antenna cable from the connector on the Bluetooth module.
Bluetooth cable
M2⋅4B FLAT HEAD 
Bluetooth module
CN4400
Bluetooth antenna cable
Figure4-19 Removing the Bluetooth module
[CONFIDENTIAL] | PORTÉGÉ M500 Maintenance Manual |